Gel Polish Starter Kit

1 x Rubber Base (colour of choice)
1 x Gel Polish (colour of choice)
1 x Gel Top Coat
1 x Buffer Block
1 x Nail File 180/240 grit

Step 1: Nail Prep
Shape your nails using the nail file and gently buff the surface of your nail with the buffer block to remove the shine.

Step 2: Rubber Base coat
Apply 1 coat of the Rubber Base as a base coat, and cure for 60 seconds.

If you have thin, brittle or damaged nails, apply 2-3 coats of the Rubber Base for added strength to prevent chipping or breaking, curing in-between coats. You can use the Rubber Base on its own without gel polish, but don’t forget to seal it off with a Top Coat.

Step 3: Paint and create your desired look with gel polish! Apply the gel polish 1mm away from the cuticle to prevent it from adhering to your cuticle and skin. Cure each coat of gel polish for 60 seconds.

Seal it off with our ultra-glossy Top Coat and nourish your cuticles with our luxurious cuticle oil!

Gel Polish
Acrylates Copolymer, Pentaerythritol tetra (3- mercaptopropionate), 2-Isopropyl Thioxanthone, Trimethylbenzoyl Diphenylphosphine Oxide, Dimethicone.

Rubber Base
Acrylates Copolymer, Cyclohexyl, Methacrylate/ethylhexyl, Methacrylate, Copolymer, Trimethylolpropane, Triacrylate.

Gel Top Coat
Acrylates Copolymer, Cyclohexyl, Methacrylate/ethylhexyl, Methacrylate Copolymer, Exythlhexyl Dimethyl Paba.

Step 1: Remove some product
For gel polish over natural nails:
File the surface the nails to remove the shine of the nail polish. If desired, trim or file off some of your nail length.

Optional: For a shorter soak-off time, file further to remove most of the gel polish.

Step 2: Protect your cuticles
Apply cuticle oil around the cuticles and skin to prevent the skin from drying out from the gel polish remover. Alternatively, you could also use Vaseline. This step is optional highly recommended.

Step 3: Soak-off
Cut your aluminium foil into squares (approx. 8cm x 8cm). Soak 3-4 cotton balls with a generous amount of acetone or gel polish remover. Peel off portions of the soaked cotton, enough to cover the surface of your nail, and place over the nail. Wrap tightly with aluminium foil, and allow to soak for 15-20 minutes.

Step 4: Remove the polish
After soaking, gently scrape off the gel polish. It should come off quite easily without too much pressure. For any stubborn bits, soak for a bit longer until it can be easily removed. After, buff the nail plate with the buffer block.

Wash your hands. Apply cuticle oil after reapplying gel polish.